AR32.35-T-2210C | Remove/install anti-roll bar on rear axle | 11.11.09 |
MODEL 613.364 /365
with HOSE rear axle for O560
T32.35-0001-01
1 Stabilizer brace
2 Spring support
3 Stabilizer
4 Bearing bracket halves
| Remove/install | ||
1 | Lift/jack up vehicle | ||
2 | Unscrew stabilizer brace (1) from spring support (2) | Installation: - Remove safety cotter pin - The specified tightening torque must be exceeded by a maximum up to the next cotter pin hole release. | |
Castellated nut connecting anti-roll bar rod to spring mount | |||
3 | Unscrew the stabilizer brace (1) from the anti-sway bar (3) and remove | Installation: - Remove safety cotter pin - The specified tightening torque must be exceeded by a maximum up to the next cotter pin hole release. | |
Castle nut, stabilizer bar strut to stabilizer bar | |||
4 | Unscrew bearing bracket (4) of anti-sway bar (3) from underbody and remove anti-sway bar (3) | Installation: Remove self-locking nuts. | |
Bolt, stabilizer bearing bracket to chassis | |||
5 | Install in the reverse order |
Rear axle stabilizer bar