Shown on model 470, on left side of vehicle |
1 | Nut |
2 | Stabilizer bar linkage |
S32.35-4523-11
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension | Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves. | |
Notes on repair work on suspension components | |||
| Remove/install | ||
1 | Raise vehicle. | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
2 | Unscrew nuts (1) from left or right torsion bar linkage (2). | ||
Note on calculation of tightening torque when using insertion or socket tools with various effective lengths | |||
Nut, torsion bar linkage to front axle stabilizer bar/lower control arm | |||
Box wrench bit | |||
3 | Remove left or right torsion bar linkage (2). | ||
4 | Install in the reverse order. |
000 589 69 03 00
Box wrench bit