Shown on model 470, on left side of vehicle |
1 | Nuts |
2 | Stabilizer bar linkage |
S32.35-4529-03
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension | Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves. | |
Topical note | Notes on self-locking nuts and bolts | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
| Remove/install | ||
1 | Raise vehicle | ||
2 | Unscrew nuts (1) on torsion bar linkage (2) | Nut, stabilizer bar linkage to rear axle/longitudinal member stabilizer bar | |
3 | Remove torsion bar linkage (2) | ||
4 | Install in the reverse order |