ar3235p2050bd
Remove/install front stabilizer bar
ประเภท ar · หัวข้อ 32.35 · เวอร์ชัน 0207 · 2020-01-23
ใช้กับ: Model 461 Model 463 (except 463.234) up to model year 2013
ไม่มีใน “th” แสดงเป็น อังกฤษ
ตำแหน่ง
กลุ่มฟังก์ชัน 2 Chassis › 32 Suspension › 32.35 Stabilizer — ซีรีส์ 461 · ซีรีส์ 463 (รุ่น 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 270, 271, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)
EinPAS 17 Drivetrain/axle › 17.50 Front axle › 17.50.41 Transverse control arm/control arm/stabilizer bar — ซีรีส์ 461 · ซีรีส์ 463 (รุ่น 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 270, 271, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)
AR32.35-P-2050BD
| Remove/install front stabilizer bar
| 19.12.2019
|
Model
| 461
|
Model
| 463 (except 463.234)
|
|
| up to model year 2013
|
18.12.2019
| Document completely revised.
|
|
|
1
| Stabilizer bar
|
2
| Nuts
|
3
| Bracket
|
4
| Heat shield
|
5
| Nut
|
6
| Bracket
|
7
| Nut
|
Warning
| Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.
| Wear protective gloves, protective clothing and safety glasses, if necessary.
| AS00.00-Z-0002-01A
|
Caution
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts
| Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.
| AS00.00-Z-0017-01A
|
Topical note
| Notes on self-locking nuts and bolts
|
| AH00.00-N-0001-01A
|
|
| Notes on repair work on suspension components
|
| AH00.00-P-0100-01A
|
| Remove/install
|
|
|
1
| Lift vehicle with vehicle lift.
|
| AR00.60-P-1006A
|
2
| Remove nuts (2) and remove holders (3).
| Nut, stabilizer bar mounting bar to trailing arm
| *BA32.35-P-1001-01A
|
3
| Remove heat shield (4).
| If installed.
|
|
4
| Remove nuts (5) and remove stabilizer (1) with holders (6).
| Nut, stabilizer bracket to frame
| *BA32.35-P-1003-01A
|
5
| Remove nuts (7) and remove holders (6) from stabilizer (1).
| When replacing stabilizer (1).
|
|
|
|
| Nut, stabilizer bar to stabilizer bracket
| *BA32.35-P-1002-01A
|
6
| Check elastomer bearings of stabilizer (1) for wear and damage.
| If problems exist,
|
|
|
|
|
|
|
|
|
| Replace relevant elastomer bearing(s).
|
|
7
| Install in the reverse order.
|
|
|
Stabilizer bar/torsion bar
|
Number
| Designation
|
| Model 460, 461
Model 463
up to model year 2019
|
BA32.35-P-1001-01A
| Nut, stabilizer bar mounting bar to trailing arm
| Nm
| 50
|
Stabilizer bar/torsion bar
|
Number
| Designation
|
| Model 460, 461
Model 463
up to model year 2019
|
BA32.35-P-1002-01A
| Nut, stabilizer bar to stabilizer bracket
| Nm
| 90
|
Stabilizer bar/torsion bar
|
Number
| Designation
|
| Model 460, 461
Model 463
up to model year 2019
|
BA32.35-P-1003-01A
| Nut, stabilizer bracket to frame
| Nm
| 90
|
เอกสารที่อ้างถึง
