Shown on model 470 on right side of vehicle |
1 | Threaded connection |
2 | Nut |
3 | Shock absorber |
S32.25-4522-03
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury from fingers being pinched or jammed when working on gas struts under pressure | Only remove and install pneumatic springs when they are not under tension and when the components are properly secured. | |
Topical note | Special instructions for lifting and supporting vehicle | ||
Notes on repair work on suspension components | |||
| Remove/install | ||
1 | Raise vehicle | ||
2 | Support rear axle in center | ||
| 000 588 10 62 00 Support plate | ||
| 000 588 11 62 00 Major assembly mount | ||
3 | Remove threaded connection (1) | Nut, shock absorber to body | |
4 | Unscrew nut (2) | Bolt, shock absorber to rear axle | |
5 | Remove shock absorber (3) | ||
6 | Check shock absorber (3) | ||
In the event of complaints | |||
| |||
Replace shock absorber (3). | |||
7 | Install in the reverse order |