Shown on model 907, on right side of vehicle with code IT5 (5.0 tons) |
1 | Screw |
2 | Screw |
3 | Nut |
4 | Shock absorber |
5 | Nut |
D32.25-A001-06
Shown on model 907, on right side of vehicle without code IT5 (5.0 tons) |
1 | Screw |
2 | Screw |
3 | Nut |
4 | Shock absorber |
D32.25-1120-02
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury from fingers being pinched or jammed when working on gas struts under pressure | Only remove and install pneumatic springs when they are not under tension and when the components are properly secured. | |
Notes on repair work on suspension components | |||
| Remove/install | ||
1 | Deactivate air suspension. | Model 907 | |
Topical note | Notes on air suspension | ||
2 | Raise vehicle. | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
3 | Support rear axle in center. | ||
| 000 588 10 62 00 Support plate | ||
| 000 588 11 62 00 Major assembly mount | ||
4 | Remove screw (1). | Model 907 | |
Screw/nut, shock absorber to frame/crossmember | |||
5 | Remove bolt (2). | ||
Topical note | Notes on self-locking nuts and bolts | ||
To do so, counterhold the nut (3). | |||
Screw/nut, shock absorber to rear axle/holder | |||
6 | Remove shock absorber (4). | ||
| Check | ||
7 | Check shock absorber (4). | ||
Notes on shock absorber testing | |||
If damage or leaks are present, | |||
| |||
replace shock absorber (4). | |||
8 | Install in the reverse order. |