Front axle stabilizer bar
Number | Designation | Model | ||
BA32.20-P-1002-02B | Self-locking nut of connecting rod to torsion bar | M10 | Nm | - |
M101.5 | Nm | - | ||
M121.5 | Nm | 95 | ||
M141.5 | Nm | - | ||
P33.20-2085-06
Removal
1 Unscrew self-locking nut (01) and bolt (02) of link rod (10) at stabilizer bar (11).
Checking
2 Check rubber mount of link rod (10) for damage and replace link rod (10) if necessary.
Install
3 Screw on self-locking nut (01) and bolt (02) of link rod (10) on stabilizer bar (11) .
Replace self-locking nut (01). Only tighten self-locking nut (01) when vehicle is ready to drive, turn steering if necessary.