Install spring clamp plates · ar3220d020003a · Mercedes-Benz WIS

AR32.20-D-0200-03A

Install spring clamp plates

 Front axle steel suspension

Number	Designation				Models 901, 902, 903, 904 with front axle 730.4	Model 903.0/4/6 and model 904.0/4/6 with code ZG1, ZG2, ZG3


BA32.20-N-1001-01A	Bolt, lower spring clamp plate to front axle beam	M121.5	Stage 1	Nm	130	130
			Stage 2	°	-	-
		M8		Nm	-	-
		M10		Nm	65	65

 Front axle steel suspension

Number	Designation				Model 905 with front axle 730.606


BA32.20-N-1001-01A	Bolt, lower spring clamp plate to front axle beam	M121.5	Stage 1	Nm	130
			Stage 2	°	-
		M8		Nm	-
		M10		Nm	65

 Front axle steel suspension

Number	Designation				Model WD1/WD2/ WD3/WD6/ WD7/XD1/ XD2/XD3/ XD4/XD5/ XD6/XD7/ YD1/YD2/ YD3/YD4/ YD5/YD6/ YD7	Model 690.6 with front axle 732.2


BA32.20-N-1001-01A	Bolt, lower spring clamp plate to front axle beam	M121.5	Stage 1	Nm	130	130
			Stage 2	°	-	-
		M8		Nm	-	-
		M10		Nm	65	65

D32.20-0007-01

1 Fit one spring clamp plate together with the lower spring bearing.
Fit bolt (1) with shear bush on the rear mounting, but do not tighten.

 Rubber spring bearing flat on the driver's side
Rubber spring bearing up on the passenger side

D32.20-0009-01

2 Fit four retaining bolts (arrows) for the spring clamp plate.

3 Tighten the retaining bolt on the shear bush (1) .

D32.20-0008-01

4 Align holes for front clamp plate joint using a suitable drift (shear bush not installed).

5 Tighten the four bolts attaching the spring clamp plate (arrows) .

D32.20-0006-01

6 Remove alignment drift.

7 Insert shear bush and retaining bolt (2) into hole and tighten .