Install/remove emergency buffer

AR32.00-P-1000EW

Install/remove emergency buffer

27.10.10

 

Installing, removing



Notes on AIRmatic

AH32.22-P-1000-02EW

  Emergency buffers (01, 02) may only be used for maneuvering.

1

Raise appropriate side of vehicle

Install emergency buffer (01) onto front axle

2

Remove boot (1) from lower spring cup (2) and slide upwards

3

Position emergency buffer (01) on lower spring cup (2)

 With opening towards the inside of the vehicle.

 Set of emergency buffers

*212589003100

4

Place boot (1) into emergency buffer (01)

 Otherwise, during the jounce process the boot (1) could be jammed between the fender and  emergency buffer (01) and be damaged as a result.

5

Slowly lower vehicle

 Make sure that the  emergency buffer(01) is positioned at the top of the fender.

6

Remove in the reverse order

Install emergency buffer (02) onto rear axle

7

Detach fender liner of fender in area of shock absorber

8

Slide protective tube (3) downwards

9

Insert emergency buffer (02)

 The  emergency buffer (02) is a two piece part (arrow).

 Set of emergency buffers

*212589003100

10

Slide emergency buffer (02) into support bushing (4) (arrow)

 During the jounce process the  emergency buffer (02) may tilt otherwise and damage the support bushing (4) or shock absorber.

11

Remove in the reverse order