represented in type 950.5 |
1 | Press (front) |
2 | Chain (front) |
3 | Press (rear) |
4 | Chain (rear) |
5 | Chassis measuring gauge |
W31.30-0072-06
1 | Drive the vehicle up to the chassis straightening device | ||
Notes on straightening the vehicle frame | |||
2.1 | Measure the vehicle chassis with chassis measuring instruments | For vehicles with chassis measuring instrument | |
Measuring vehicle frame using frame measuring gages. | |||
2.2 | Measure the vehicle chassis with the cord device | For vehicles with curtain pull device | |
Aligning vehicle frame with cord assembly. | |||
3 | Correct the lateral deformation of the vehicle chassis. | Straighten side bending of vehicle frame | |
4 | Correct the vehicle side member alignment. | Align longitudinal member | |
5 | Correct the vertical deformation of the vehicle's chassis. | Straighten vertical distortion of vehicle frame. | |
6 | Reinforce the vehicle's chassis | Reinforce vehicle frame | |
Only carry out this work step when the vehicle chassis entrance area has deformations or has been bent inwards. | |||
7 | Carry out a test drive with the vehicle and repeat the measurement |