AR30.30-W-1200A | Remove/install radar sensor with bracket | 15.9.10 |
MODEL 930, 934 with CODE (ET4) Autonomous intelligent cruise control Plus
MODEL 930, 932, 933, 934, 940, 942, 943, 944, 958 up to 31.8.10 with CODE (ET5) Autonomous intelligent cruise control
MODEL 930, 934 up to 31.8.10 with CODE (BC7) Active Brake Assist (ABA)
W31.00-1063-11
Shown on model 940 as of production period 31.12.2004
1 Bracket
A63.1 Radar sensor controller unit
| Remove/install | ||
1 | Detach cover on the radar sensor controller unit (A63.1) | ||
2 | Disconnect electrical connections on the radar sensor controller unit (A63.1) | ||
3 | Remove radar sensor controller unit (A63.1) from bracket (1) | ||
4 | Remove bracket (1) | Installation: If the new bracket provided as a replacement (1) is different from the bracket (1) installed previously: | |
Install modified bracket (1). | |||
5 | Install in the reverse order | ||
6 | Adjust the radar sensor controller unit (A63.1) | Model 930, 934 up to 31.12.2004 with code (ET4) ART Plus Model 930, 932, 933, 934, 940, 942, 943, 944 up to 31.12.2004 with code (ET5) ART | |
Model 930, 934 as of 1.1.2005 with code (ET4) ART Plus Model 930, 932, 933, 934, 940, 942, 943, 944, 958 as of 1.1.2005 up to 31.08.2010 with code (ET5) ART Model 930, 934 up to 31.08.2010 with code (BC7) Active Brake Assist |