1 | Radiator trim |
7 | Retaining clip |
8 | Cover |
S88.00-4512-05
1 | Radiator trim |
2 | Support brace |
3 | Quick-release coupling |
S30.30-4519-06
1 | Radiator trim |
4 | Cover |
5 | Ball stud |
6 | Electrical connection |
A89 | Distronic (DTR) control unit |
S30.30-4520-06
| Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Switch off ignition and remove transmitter key | ||
2 | Remove retaining clips (7) and remove cover (8) | Installation: Check retaining clips (7) for damage. | |
For damage | |||
| |||
Replace respective retaining clip (7) | |||
3 | Open quick-release coupling (3), remove catch hook (arrows A) and remove fitting (2) | ||
4 | Push radiator trim (1) slightly to the front, unlock locks (arrows B) and remove cover (4) | ||
5 | Pull DISTRONIC (DTR) control unit (A89) out of the holder | The DISTRONIC (DTR) control unit (A89) is enraged with three ball studs (5) in holder. | |
6 | Unlock and detach electrical connection (6) on DISTRONIC (DTR) control unit (A89) | ||
7 | Install in the reverse order | ||
8 | Perform adjustment of the DISTRONIC (DTR) control unit (A89) with diagnostic system | ||
| |||
| 000 588 17 21 00 Adjusting device |