P30.12-2003-06
1 Plug
2 Nut
3 Accelerator pedal
4 Bracket
B37 Accelerator pedal sensor
S16/6 Kickdown switch
Modification notes
17.9.03 | Operation step for unclamping ground strap for battery taken away | Step 1 | |
17.9.03 | Operation step for disconnecting connector on kickdown switch limited | Step 5.1 |
| Remove/install | ||
1 | Remove plug (1) | ||
2 | Unscrew nut (2) | Installation: Install new nut (2). | |
3 | Pull out accelerator pedal (3) | The accelerator pedal (3) must not be disassembled. | |
Installation: Ensure that recess of accelerator pedal (3) is located in bracket (4) of firewall. | |||
4 | Unplug electrical connector for pedal value sensor (B37) | Installation: Pay attention to correct installation of lines. | |
5 | Unplug electrical connector from kickdown switch (S16/6) | Vehicles with kickdown switch | |
Installation: Pay attention to correct installation of lines. | |||
6 | Remove accelerator pedal (3) | ||
7 | Install in the reverse order | ||
8 | Read out fault memory and erase if required | ||
| Connect STAR DIAGNOSIS and read out fault memory | ||
STAR DIAGNOSIS diagnosis system |
Commercially available tools