AR30.10-T-1156B | Pedal travel sensor removal and installation | 27.9.00 |
ENGINE 441.980 in MODELNMB613.355
ENGINE 402.970, 446.938 in MODEL NMB613.455 /485
T30.35-0001-11
1 Pedal travel sensor relay rod
2 Bolt
3 Service brake valve
| Remove/install | ||
1 | Switch off ignition | ||
2 | Remove windshield wiper linkage cover | ||
3 | Detach electrical plug-in connection for pedal travel sensor | The electrical plug-in connection is attached to the frame beneath the pedal position sensor. | |
Installation: If necessary reattach removed tie strap. | |||
4 | Remove pedal position sensor relay rod (1) | Use suitable tool to press off. | |
5 | Remove bolts (2) and extract pedal travel sensor | ||
6 | Install in the reverse order | ||
7 | Adjust accelerator pedal travel sensor | ||
Test values, regulation - chassis-side
Number | Designation | Engine 402.970 | Engine 402.970 with EMR | ||
BE30.12-N-1001-01B | Gap | Stop bolt accelerator pedal - vehicle floor | mm | 1...2 | 1...2 |
BE30.12-N-1003-01B | Setting | Length of linkage accelerator pedal - position sensor | mm | 248.5...251.5 | 248.5...251.5 |
Test values, regulation - chassis-side