Test values, control - chassis-side
Number | Designation | Engine 402.970 | Engine 447.947/ | ||
BE30.12-N-1001-01B | Gap | Stop screw, accelerator pedal - vehicle floor | mm | 1...2 | - |
BE30.12-N-1002-01B | Gap | Full-load position, accelerator pedal - stop screw | mm | 10 | 10 |
T30.10-0005-01
1 Fully depress accelerator pedal to full-load position.
When the accelerator pedal is at the full-load position, the control lever (1) of the injection pump must lie against the full-load stop screw (2). Adjust the length of the linkage if necessary.
Mechanical transmission:
The accelerator pedal must not lie against the vehicle floor.
Automatic transmission:
Observe specified gap between accelerator pedal and stop screw
(kickdown switch then actuated).