AR29.10-W-0350A | Disassembling and assembling pedal assembly | 15.6.09 |
MODEL 950, 952, 953, 954 with BODY 942.899 with CODE (GE1) electronic drive control
W29.10-0002-09
1 Pedal bracket
2 Return spring
3 Fuse
4 Bearing bolt
13 Emergency clutch pedal
14 Brake pedal
S4 Stop lamp switch
5 Nut
6 Bracket
7 Piston rod
12 Bearing bushings
| Remove/install | ||
1 | Remove pedal assembly | ||
2 | Detach retracting spring (2) | ||
3 | Detach piston rod (7) from brake pedal (14) | Installation: Use new cotter pin. Grease bearing points with long-life grease. | |
4 | Remove retainer (3) | Installation: Install new retainer (3). | |
5 | Remove bearing pin (4) from pedal bracket (1) | Installation: Grease bearing pin (4) with long-life grease. | |
6 | Remove emergency clutch pedal (13) and brake pedal (14) from pedal bracket (1) | ||
7 | Remove brake value sensor and bracket (7) with brake light switch (S4) | | |
8 | Remove plain bearings (12) of emergency clutch pedal (13) and the brake pedal (14) | Installation: Grease bearing bushings (12) with long-life grease. | |
9 | Install in the reverse order |
Service brake valve / brake value sensor
Number | Designation | Model | |
BA42.60-N-1001-03A | Nut, service brake valve/brake value sensor to pedal bracket | Nm | 22 |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-06A | Long-life grease | A 000 989 63 51 11 |