Remove/install pedal assembly

AR29.10-P-0300W

Remove/install pedal assembly

02.06.2015

Model

166, 292

Model

172 with transmission 722

Illustrated on model 172

1

Pedal assembly

2

Nuts

3

Electrical connector

4

Safety screw

5

Clevis

S9/1

Stop lamp switch

Shown on model 166

01

Tool

1

Pedal assembly

6

Lower section of dashboard



Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

 

Remove/install

1

Switch off ignition and keep transmitter key at a location beyond transmitter range (at least 2 m)

2

Remove left cover below dashboard

Model 166, 292

AR68.10-P-1500GQ

3

Disconnect electrical connector (3) from brake light switch (S9/1)

4

Unscrew safety screw (4) and remove brake pedal from clevis (5)

 Installation: The safety screw (4) must be replaced.

 Model 172 with transmission 722Brake booster to brake pedal

*BA43.10-P-1002-01J

 Model 166, 292Bolts, brake pedal to brake booster

*BA43.10-P-1002-01G

5

Detach electric parking brake switch from instrument panel lower part (6)

Model 166, 292

AR42.20-P-0505W

 Do not disconnect electrical connector from electric parking brake switch.

6.1

Insert tool (01) through opening (arrow) of instrument panel lower part (6) and unscrew nuts (2)

Model 166, 292

 Nut, brake booster carrier to front end

*BA43.10-P-1001-01G

6.2

Unscrew nuts (2)

Model 172 with transmission 722

 Nut, brake pedal assembly to body

*BA29.10-P-1001-02D

7

Remove pedal assembly (1)

8

Install in the reverse order

 Pedals, bearing bracket

Number

Designation

Model 172

BA29.10-P-1001-02D

Nut, brake pedal assembly to body

Nm

22

 Brake booster

Number

Designation

Model 166

Model 292

BA43.10-P-1001-01G

Nut, brake booster carrier to front end

Nm

20

20

 Brake booster

Number

Designation

Model 166

Model 292

BA43.10-P-1002-01G

Bolts, brake pedal to brake booster

Nm

20

20

 Pneumatic brake booster

Number

Designation

Model 172

BA43.10-P-1002-01J

Brake booster to brake pedal

Nm

22