AR29.10-D-0300D | Remove/install pedal assembly | 10.11.09 |
MODEL 901.6, 902.6, 903.6, 904.6 with CODE (MJ6) Engine start and stop system
D29.10-1103-05
1 High pressure line
2 Clamp
3 Hexagon bolt
4 Washer
5 Clutch master cylinder
6 Circlip
7 Connector hose
8 Hexagon bolt
9 Pedal bearing bracket
10 Clutch switch 1
11 Stop lamp switch
12 Washer
13 Hexagon bolt
14 Pin
15 Spring
16 Brake pedal
17 Fuse
18 Pin
19 Thrust rod
20 Fuse
21 Clip-type fastener
22 Spring cup
23 Compression spring
24 Circlip
25 Thrust rod
26 Clutch pedal
27 Fuse
28 Washer
29 Bracket
30 Clutch switch 2
31 Stop buffer
| Remove/install | ||
Danger! | Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes. | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
| Brake fluid notes | All models | |
| Notes on repairs to brake system | All models | |
1 | Detach connector from clutch switch 2 (30) | ||
2 | Release and remove clutch switch 2 (30) | ||
3 | Remove clutch master cylinder (5) with bracket (29) | ||
4 | Remove over-center spring (23) | ||
| |||
5 | Remove clutch pedal (26) | Model 901.6-905.6 as from VIN 1R 515 590 Check stop buffer (31). Replace in event of damage or loss. Installation: Grease bush of clutch pedal. | |
6 | Remove retainer (20) and pin (18) | Installation: Grease pin. | |
7 | Remove retainer (17) and pin (14) | Installation: Grease pin. | |
8 | Unhook spring (15) and remove brake pedal (16) | ||
9 | Detach connector from brake light switch (11) | ||
10 | Detach connector from clutch switch 1 (10) | ||
11 | Release and remove clutch switch 1 (10) | ||
12 | Remove pedal support (9) from firewall | | |
13 | Install in the reverse order |
Pedals, bearing bracket
Number | Designation | Model | |
BA29.10-N-1001-02B | Bolt, pedal support to firewall | Nm | 23 |
901 589 00 31 00
Spring compressor