AR29.10-D-0300C | Remove/install pedal assembly | 7.12.09 |
MODEL 901.6, 902.6, 903.6, 904.6 with CODE (GD5) Automated manual transmission 716.643
MODEL 901.6, 902.6, 903.6, 904.6 with CODE (G40) Automatic transmission
MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (G40) Automatic transmission
D29.10-1102-11
1 Hexagon bolt
2 Pedal bearing bracket
3 Stop lamp switch
4 Washer
5 Hexagon bolt
6 Pin
7 Spring
8 Brake pedal
9 Fuse
10 Pin
11 Thrust rod
12 Fuse
| Remove/install | ||
Danger! | Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes. | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
| Brake fluid notes | ||
| Notes on repairs to brake system | ||
1 | Remove retainer (12) and pin (10) | Grease pin | |
5 | Remove retainer (9) and pin (6) | Grease pin | |
6 | Unhook spring (7) and remove brake pedal (8) | ||
3 | Detach connector from brake light switch (3) | ||
4 | Remove screws (1, 5) and remove pedal support (2) | | |
5 | Install in the reverse order |
Pedals, bearing bracket