P28.10-2121-01
1 Install ball bearing using suitable drift.
P28.10-2122-01
2 Install output shaft (3) with gear wheel and shim.
The offset side of washer must point towards bearing.
P28.10-2123-01
3 Insert thrust washer (4).
P28.10-2124-01
4 Install inner and outer seal rings.
Pack space between sealing lips with grease.
P28.10-2125-01
5 Insert shim, press in ball bearing using suitable drift.
The offset side of shim must point towards bearing.
P28.10-2126-01
6 Insert thrust washer (5).