Remove/install transfer case temperature sensor

AR28.19-P-1007MNM

Remove/install transfer case temperature sensor

05.05.2020

Transmission

725.09 in model 217, 222 with engine 177

with code M005 (Vehicles with 4MATIC/all-wheel drive)

Modification notes

27.10.2017

Temperature sensor to transfer case

BA28.10-P-1012-01G

1

Transfer case

B91

Transmission oil temperature sensor

 Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Remove rear engine mount

AR22.10-P-1160MNM

2

Drain transmission oil from transfer case (1)



Transfer case - oil change

AP28.00-P-2801B

3

Release and disconnect electrical connector from transmission oil temperature sensor (B91)

4

Unscrew transmission oil  (B91) and seal opening with suitable plug

 Temperature sensor to transfer case

*BA28.10-P-1012-01G

 Record plug

*129589009100

5

Install in the reverse order

 Complete transfer case

Number

Designation

Model 205, 213, 217, 218, 222, 223, 238, 253, 257, 290 with transmission 725.0/1
with code M005 (Vehicles with 4MATIC/all-wheel drive)

BA28.10-P-1012-01G

Temperature sensor to transfer case

Nm

30