Remove/install transfer case actuator motor

AR28.19-D-1004H

24.11.08

MODEL 906 with CODE (ZG1) Engageable all-wheel drive

MODEL 906 with CODE (ZG2) Permanent all-wheel drive

MODEL 906 with CODE (ZG3) Engageable all-wheel drive with gear reduction

MODEL 906 with CODE (ZG4) Permanent all-wheel drive with gear reduction

D28.19-1112-11

1 Electrical connector

2 Bolts

M88 All-wheel drive actuator motor

 	Remove/install
 Danger!	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
		 When carrying out the work ensure that on vehicles with code ZG1 Engageable all-wheel drive or code ZG3 Engageable all-wheel drive with gear reduction, the all-wheel drive engagement is in the "Off" position.
1	Raise vehicle		AR00.60-D-1000H
2	Disconnect electrical connector (1)
3	Remove all-wheel drive actuator motor (M88)	 Installation: Mount the transfer case actuator motor (M88) carefully as the sealing ring can be destroyed.
		 Installation: Grease sealing ring.
			*BA28.19-N-1005-01B
4	Install in the reverse order

 Transfer case electrical system

Number	Designation		Model 906 with code ZG1/ZG2/ ZG3/ZG4


BA28.19-N-1005-01B	Bolt, AWD actuator motor to housing	Nm	27