Remove/installing radial shaft seal at output flange to front axle

AR28.10-P-4075MRH

Remove/installing radial shaft seal at output flange to front axle

15.03.2019

Transmission

725.0 in model 257 with engine 264

with code M005 (4MATIC)

1

Guide

2

Radial shaft sealing ring

6

Drift

2

Radial shaft sealing ring

3

Support ring

4

Bellows

5

Protection

2

Radial shaft sealing ring

3

Support ring

7

Drift

 Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A



Remove

1

Remove transfer case.

AR28.10-P-0100MSA

2

Remove radial shaft sealing ring (2) using a suitable tool.


Do not damage seat of radial shaft sealing ring (2) in transfer case.
Leakage will otherwise occur.

3

Remove support ring(3).

4

Remove boot(4).

5

Check seat of radial shaft sealing ring (2) for damage and galling.

If damage or galling is present.



Replace transfer case.



Install

6

Mount guide(1) onto drive shaft.

 Drift

*725589051500

7

Lubricate sealing lip of radial shaft sealing ring(2) with transmission oil.



Automatic transmission fluids (ATF) (specification 236.17)

BB00.40-P-0236-17A

 Replace radial shaft sealing ring (2).

8

Position radial shaft sealing ring(2) in opening.

9

Press in radial shaft sealing ring(2) with drift(6) until the drift(6) makes contact with the housing.

 Drift

*725589051500

10

Remove guide(1).

11

Fit protection(5) on output shaft.

 Drift

*725589041500

12

Moisten boot(4) on inside with transmission oil.



Automatic transmission fluids (ATF) (specification 236.17)

BB00.40-P-0236-17A

13

Slide boot(4) with support ring(3) onto protection(5).

14

Press in support ring(3) with drift(7) until the drift(7) lies on the housing.

 Drift

*725589041500

15

Remove protection (5) from output shaft.

 Drift

*725589041500

16

Install transfer case.

AR28.10-P-0100MSA