Modification notes |
10.09.2018 | Repair materials reference BR00.45-Z-1028-04A added | Operation step 3 | |
10.09.2018 | Filling capacities reference BF28.10-N-1001-01P added | Operation step 7 | |
10.09.2018 | "Hand pump 210 589 00 71 00" added | Operation step 7 | |
10.09.2018 | Method extended | Operation step 10 | |
10.09.2018 | Filling capacities reference BF28.10-N-1001-01P added | Operation step 8 | AR28.10-S-0100-03P |
10.09.2018 | "Hand pump 210 589 00 71 00" added | Operation step 8 | AR28.10-S-0100-03P |
08.10.2018 | ATF | Model 470, 471 with engine 699 with code ZG3 (Engageable all-wheel drive with transmission ratio) | BF28.10-N-1001-01P |
1 | Electrical connector |
2 | All-wheel drive indicator switch |
S28.00-4501-11
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove | ||
1 | Raise vehicle. | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
2 | Disconnect electrical connector (1). | ||
| Clean | ||
3 | Clean area surrounding all-wheel drive indicator switch (2). | Assembly cleaner | |
4 | Remove all-wheel drive indicator switch (2). | ||
| Install | ||
5 | Screw-in all-wheel drive indicator switch (2). | ||
Note on calculation of tightening torque when using insertion or socket tools with various effective lengths | |||
Commercially available devices/tools | |||
All-wheel drive indicator switch to transfer case | |||
6 | Connect electrical connector (1). | ||
| Check | ||
7 | Check oil level in transfer case. | Draining and filling oil in transfer case | |
Commercially available devices/tools | |||
Filling screw to transfer case | |||
Drain screw to transfer case | |||
ATF | |||
Thread locking adhesive, Loctite 241 | |||
Assembly cleaner | |||
Loctite 7063 (400 ml) cleaning spray | |||
Hand pump | |||
If corresponding findings are present, | |||
| |||
Correct oil level. | |||
8 | Lower vehicle. | ||
9 | Read out and delete fault memory using vehicle diagnosis system. | ||
| Connect/disconnect diagnostic unit | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
10 | Check transfer case for leak tightness and proper operation with engine running. | ||
Notes on evaluating leakages |
210 589 00 71 00
Hand pump