Remove/install shift lock and range selector lever shaft

AR27.60-P-0935GC

9.10.97

TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133

TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109

TRANSMISSION 722.702 in MODEL 168.035 /135

TRANSMISSION 722.750 /751 in MODEL 414.700

P27.60-0420-06

Shown on transmission 722.700 up to 23.1.01 in model 168

1 Shift lock lever shaft (ignition lock)

2 Shift lock lever shaft (brake pedal)

3 Screw

4 Bolts

5 Range selector lever shaft

6 Spring

7 Locking pawl

8 Detent plate

P27.60-0421-01

Installation position, shift lock lever shafts

Shown on transmission 722.700 up to 23.1.01 in model 168

1 Shift lock lever shaft (ignition switch)

2 Shift lock lever shaft (brake pedal)

 	Remove, Install
1	Remove transmission with torque converter	 Transmission 722.7 in model 168 up to 30.6.00	AR27.10-P-0500GC
		Transmission 722.7 as of 1.7.00 in model 168	AR27.10-P-0500GD
		Transmission 722.7 in model 414.600700	AR27.10-L-0500VA
2	Attach transmission to assembly stand.		AR27.10-P-0600-01GC
3	Remove electrohydraulic control module		AR27.19-P-0200GC
4	Remove transmission housing from torque converter casing		AR27.50-P-0601GC
5	Remove bolt (3)		*BA27.40-P-1006-01A
6	Drive range selector lever shaft (5) out of transmission housing using a suitable drift	 Mark position of range selector lever shaft (5) in relation to transmission housing.
7	Unscrew bolts (4)		*BA27.40-P-1007-01A
8	Unhook spring (6) from lock pawl (7)
10	Drive shift lock lever shaft (2) out of transmission housing using a suitable drift	 Mark position of shift lock lever shaft (2) in relation to transmission housing.
		 Installation: observe installation position shift lock lever shaft (2).
11	Install in the reverse order

 Housing

Number	Designation		Transmission 722.7


BA27.40-P-1006-01A	Bolt, detent plate to range selector lever	NM	8
BA27.40-P-1007-01A	Bolt, locking pawl to shift lock lever	NM	8