P27.60-0455-06
1 Locking device
2 Cover
3 Cover bolts
Arrows Bolts
| Removing, installing | ||
1 | Unclip locking device (1) from shift rod | Only clip-type locking devices with a radius should be used otherwise it is possible that they will be pressed out and the shift rods will fall off the intermediate shift levers | |
2 | Unhook shift rod | Installation: If necessary adjust shift rod | |
3 | Remove cover (2) | Remove bolts (3) | |
4 | Disconnect electrical plug | ||
5 | Loosen and remove console with floor selector | Remove bolts (arrows) | |
6 | Remove floor selector | Dismantle and assemble floor selector according to findings | |
Installation: Check gasket for correct installed position and condition and replace if necessary | |||
7 | Install in reverse order | ||
8 | Check function of shift mechanism |