AR27.60-D-0400B | Inspecting operating lever setting | 10.11.97 |
TRANSMISSION 722.339 in MODEL 602.3 with ENGINE 601.940
with CODE (G40) automatic transmission W4A028
with CODE (GS4) touch shift for automatic transmission
D27.60-0008-05
A Actuating lever for selector lever control cable
B Locking device for ball head
C Selector lever control cable
D Direction of motion of actuating lever
P Shift position "P" (park position)
| Checking | ||
1 | Loosen locking device for ball head (B) | ||
2 | Detach selector lever control cable (C) from actuating lever (A) | ||
3 | Check position of actuating lever in park position | Specified value: 46°12' to groove in the drive shaft roughly corresponds to 5 teeth on the drive shaft. | |
4 | Switch on ignition. Shift into all shift stages one after the other | The actuating lever (A) must approach the associated shift position corresponding to the shift stage. |