1 | Automatic transmission auxiliary oil pump |
2 | Electrohydraulic controller unit |
3 | Bolts |
S27.57-A001-76
1 | Automatic transmission auxiliary oil pump |
2 | Electrohydraulic controller unit |
4 | Bolts |
5 | Guide pins |
S27.57-A002-76
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Topical note | Notes on threaded connections fastened using a tightening angle-based tightening process | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | General information on repair work on transmission | ||
| Remove | ||
1 | Remove electrohydraulic controller unit (2). | ||
2 | Unscrew bolts (3). | ||
3 | Unscrew screw/bolts (4). | ||
4 | Remove auxiliary oil pump of automatic transmission (1) from electrohydraulic controller unit (2). | ||
| Install | ||
5 | Align auxiliary oil pump of automatic transmission (1) using the guide pin (5) at the electrohydraulic controller unit (2). | ||
6 | Tighten new screws (4). | Screw/bolt, auxiliary oil pump to shift valve body cover | |
7 | Tighten new screws (3). | Screw/bolt, electrical connection for auxiliary oil pump to control unit | |
8 | Install electrohydraulic controller unit (2). |