Shown on model 639 with engine 646 |
1 | Bolts |
2 | Oil return line |
3 | Oil feed line |
4 | Union nut |
5 | Union nut |
N27.55-2007-06
| Remove/install | ||
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Topical note | Notes on bolted connections with self tapping screws | ||
1 | Remove front lower engine compartment paneling |
| |
2 | Unscrew union nuts (4, 5) of oil cooler return line and oil cooler feed line | TRANSMISSION 722.680/682Union nut, oil line to thermostat valve | |
3 | Detach oil return line (2) and oil feed line (3) | Installation: | |
TRANSMISSION 722.680/682Self-tapping screw, oil line on left and right to thermostat | |||
4 | Remove automatic transmission thermostat | To do this, remove screw/bolts (1) . | |
TRANSMISSION 722.680/682Self-tapping screw, thermostatic valve to oil pan | |||
5 | Install in the reverse order | ||
| Check | ||
6 | Check oil level in automatic transmission and correct if necessary |