1 | Screw |
2 | Retaining clamp |
3 | Oil cooler |
4 | Oil hoses |
S27.55-4514-06
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Notes on automatic transmission | |||
| Remove/install | ||
1 | Drain transmission oil | ||
| |||
2 | Remove hood catch and place to one side | ||
3 | Remove upper crossmember from hood catch | ||
4 | Unscrew bolt (1) | Bolt, oil cooler to cooler bracket | |
5 | Release retaining clip (2) and remove oil cooler (3) | ||
6 | Remove oil hoses (4) from oil cooler (3) and seal openings using suitable stop plugs | Record plug | |
Hose clamp pliers | |||
7 | Remove oil cooler (3) | ||
8 | Install in the reverse order | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
9 | Perform engine test run and check oil cooler (3) for leak tightness and proper operation |
454 589 00 37 00
Hose clamp pliers
129 589 00 91 00
Record plug