Transmission | 725.0 in model 213, 238 with engine 274 |
with code M005 (Vehicles with 4MATIC/all-wheel drive) | |
Transmission | 725.0 in model 213, 238 with engine 642 |
with code M005 (Vehicles with 4MATIC/all-wheel drive) | |
Transmission | 725.0 in model 213, 238 with engine 654 |
with code M005 (Vehicles with 4MATIC/all-wheel drive) | |
Transmission | 725.0 in model 213, 238, 257 with engine 264 |
with code M005 (Vehicles with 4MATIC/all-wheel drive) |
Shown on transmission 725.0 with engine 274 with code M005 (4MATIC) |
1l | Oil line |
1r | Oil line |
2 | Oil cooler |
3 | Automatic transmission |
4 | Retaining clamps |
P27.55-2322-05
Shown on transmission 725.0 with engine 654 with code M005 (4MATIC) |
1l | Oil line |
1r | Oil line |
2 | Oil cooler |
3 | Automatic transmission |
P27.55-2323-05
Shown on transmission 725.0 with engine 642 with code M005 (4MATIC) |
1l | Oil line |
1r | Oil line |
2 | Oil cooler |
3 | Automatic transmission |
4 | Retaining clamps |
P27.55-2337-04
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Notes on automatic transmission | |||
| Remove/install | ||
1 | Remove lower engine compartment paneling. |
| |
Transmission 725.0 in model 257 with engine 264 | |||
Installation: Only install lower engine compartment paneling after leak test. | |||
2 | Thoroughly clean area around oil lines(1l, 1r) at oil cooler(2). | ||
3 | Detach retaining clamps(4) of oil lines(1l, 1r). | Transmission 725.0 in model 213, 238 with engine 274 | |
Screw, oil cooler oil line to oil pan | |||
Bolt, clamp to oil line | |||
Bolt, clamp of oil cooler oil line to bracket | |||
Screw, oil cooler oil line clamp to oil pan | |||
4 | Detach oil lines(1l, 1r) from automatic transmission(3). | ||
Record plug | |||
5 | Seal openings in automatic transmission(3) using suitable stop plugs. | Record plug | |
6 | Detach oil lines(1l, 1r) from oil cooler(2). | ||
Record plug | |||
7 | Seal openings in oil cooler(2) using suitable stop plugs. | Record plug | |
8.1 | Remove oil lines(1l, 1r) towards the rear. | Transmission 725.0 in model 213, 238 with engine 274 | |
Installation: Replace seals. | |||
8.2 | Remove oil lines(1l,1r) downwards. | Transmission 725.0 in model 213, 238 with engine 654 | |
Installation: Replace seals. | |||
9 | Install in the reverse order | ||
10 | Check and correct oil level in automatic transmission(3). |
| |
Transmission 725.0 (except 725.007/017/047) in model 213 with engine 274 | |||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
11 | Check automatic transmission (3) for proper operation and leak tightness. | ||
12 | Install lower engine compartment paneling. |
| |
Transmission 725.0 in model 257 with engine 264 |
129 589 00 91 00
Record plug