D27.55-A007-08
1 | Oil cooling feed line | 3 | Double clamp | |
2 | Retaining clamps |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of burns and scalding when handling hot fluids and components they come into contact with. Risk of injury to skin and eyes when handling hot fluids. | Wear protective gloves, protective clothing and safety glasses, if necessary. Pour hot fluids in suitable containers only. | |
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Notes on automatic transmission | |||
| Remove/install | ||
1 | Raise vehicle. | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
Installation: Do not lower vehicle until after engine test run. | |||
2 | Remove double clamp (3). | Bolt, clamp to oil line | |
3 | Remove oil cooling feed line (1) from oil cooler. | ||
4 | Release retaining clips (2), unclip oil cooling feed line (1) from retaining clips (2) and remove in downward direction. | ||
5 | Disconnect oil cooling feed line (1) from transmission and remove oil cooling feed line (1). | ||
6 | Install in the reverse order | ||
Concluding tasks | |||
7 | Check oil level in the automatic transmission with the ultrasound device; correct if necessary. | ||
| 000 588 06 82 00 Oil dispenser | ||
| 000 588 09 19 00 Oil level sensor | ||
| Automatic transmission fluids (ATF) (specification 236.17) | ||
MB Plastilube brake paste (brownish) | |||
Socket wrench | |||
Adapter | |||
Socket wrench | |||
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
8 | Perform engine test run; when doing so, check oil cooling feed line (1) for leak tightness. | ||
9 | Lower vehicle. | ||
Topical note | Special instructions for lifting and supporting vehicle |
724 589 01 09 00
Socket wrench
725 589 00 90 00
Adapter
725 589 00 09 00
Socket wrench