Remove / install differential

AR27.50-P-0770GC

6.2.98

TRANSMISSION 722.700 in MODEL 168.031 /032 /033 /131 /132 /133

TRANSMISSION 722.701 in MODEL 168.006 /007 /008 /009 /109

TRANSMISSION 722.702 in MODEL 168.035 /135

TRANSMISSION 722.750 /751 in MODEL 414.700

P27.50-2036-06

1 Differential

2 Reservoir

3 Torque converter housing:

	Remove
1	Detach transmission housing from torque converter housing (3)		AR27.50-P-0601GC
2	Remove expansion reservoir (2) in torque converter housing (3)	 Only transmission 722.701 in model 168. Lift out differential as far as possible and support so that the expansion reservoir can be unbolted.	AR27.40-P-0330GC
	Expansion reservoir discontinued	Transmission as of c. 11.09.00 in model 168.	BT27.40-P-0002-01A
3	Remove differential (1) towards the side
4	Remove tapered roller bearing from differential		AR26.50-P-0441-01GC
		 Puller	*001589493300
		Clamping pliers	*201589043400
		 Drift	*168589071500
		 Drift	*168589021500
5	Remove tapered roller bearing outer races in torque converter housing and transmission housing		AR27.50-P-0770-01GC
		 Countersupport	*000589343300
		 Internal extractor	*000589303300
		 Plate	*168589136300
		 Plate	*168589126300
		 Drift	*168589041500
 	Disassemble/assemble
6	Disassemble and assemble differential	 Only if repair work must be carried out on the differential.	AR26.50-P-0500GC
	Install
7	Measure and set preload of taper roller bearings of differential	 Installation: if replacing the differential (1) or the differential bearings, the preload of the differential bearings must be measured and adjusted.	AR27.50-P-0570-03GC
		Preload of differential tapered roller bearings	*BE27.50-P-1010-01A
		 Plate	*168589126300
		 Plate	*168589136300
		 Parallel support	*168589032100
		 Pressing tool	*168589042100
		Depth gauge, range 0 - 300 mm, readings to 0.01 mm	*WE58.40-Z-1002-19A
		Depth gauge, range 0 - 300 mm, readings to 0.01 mm	*WE58.40-Z-1002-19A
8	Install tapered roller bearing outer races in torque converter housing and transmission housing		AR27.50-P-0770-01GC
		 Plate	*168589136300
		 Plate	*168589126300
		 Drift	*168589041500
		 Internal extractor	*000589303300
		 Countersupport	*000589343300
9	Install tapered roller bearing in differential		AR26.50-P-0441-01GC
		 Drift	*168589021500
		 Drift	*168589071500
		 Clamping pliers	*201589043400
		 Puller	*001589493300
10	Install differential (1) from the side
	Expansion reservoir discontinued	Transmission as of c. 11.09.00 in model 168.	BT27.40-P-0002-01A
11	Install expansion reservoir (2) in torque converter housing (3)	 Only transmission 722.701 in model 168.	AR27.40-P-0330GC
12	Attach transmission housing to torque converter housing (3)		AR27.50-P-0601GC