AR27.20-S-0001-01EA | Detach/attach torque converter of clutch plate | ||
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Topical note | Notes on threaded connections fastened using a tightening angle-based tightening process |
115 589 03 59 00
Long wedge
001 589 65 09 00
Socket wrench bit
654 589 00 40 00
Counterholder
Model 447, 448 with engine 274 with transmission 725.0
Use socket wrench socket to turn and counterhold the crankshaft .
Model 447 with engine 654.9 with transmission 725.0
Use socket wrench socket to turn and counterhold the crankshaft .
Remove
1 | Turn crankshaft until screws (1, 2, 3, 4) of torque converter are visible in access opening. |
Helper required. |
2 | Remove screws (1, 2, 3, 4). |
Counterhold the crankshaft. |
3 | Pry torque converter off drive plate using long wedge. |
P27.20-2137-06
Install
4 | Align drive plate and torque converter with each other. |
The hole pattern of the drive plate and torque converter must match. |
If necessary, |
|
Rotate crankshaft. |
5 | Check whether torque converter is lying flat against drive plate. |
If necessary, |
|
push torque converter onto drive plate using long wedge. |
6 | Screw in new bolts (1, 2, 3, 4) in numerical sequence in stages . |
Turn crankshaft until screws (1, 2, 3, 4) are accessible through access opening. |