AR27.19-S-1718A | Removing and installing the automatic box control module | 16.12.95 |
ENGINE 601.970, 111, 611.980 in MODEL 638 with CODE (G40) Automatic transmission
S27.19-2005-06
1 Right air nozzle
2 Combined connector
3 Screw
A4 Automatic transmission control module
A4.1 Plug-in connection
| Removing and installing | ||
1 | Disconnect the ground conductor in the battery | Einbau : Radio code see | |
Instruction manual | |||
2 | Remove the right air nozzle (1) | ||
3 | Unscrew screws (3) of the automatic transmission control module in the tubular support of the dashboard | 4 screws | |
4 | Remove the automatic transmission control module (A4) | Remove the combined connector (2) downwards. To do this, the electric connection must be reached. Installation Tie the electric connection to the existing cable harness | |
5 | Disconnect the plug-in connection (A4.1), to do this unlock the sealing flange of the combined connector (2) | Installation: Fit the combined connector (2) on the rear, raise the sealing flange until it is vertical and make the plug-in connection (A4.1) pushing the sealing flange downwards. | |
6 | Installation in reverse order |