AR27.19-S-1000A | Removing and installing radial retainer of the plug-in connection in the transmission housing | 29.11.95 |
ENGINE 601.970, 111, 611.980 in MODEL 638 with CODE (G40) Automatic transmission
S27.19-2007-02
1 Electro-hydraulic control module
2 Retainers
X106 Plug-in connection
| Removing and installing | ||
1 | Disconnect the ground conductor from the battery | ||
2 | Remove the oil pan from the automatic transmission | ||
3 | Remove the electro-hydraulic control module (1) | The inductive transmitter (output n.d.r.) remains installed. The inductive transmitter plug-in connection (output n.d.r.) cannot be disconnected. The electro-hydraulic control module (1) is taken out by lifting it until the plug-in connection (X106) can be taken out of its borehole. | |
4 | Remove the retainers (2) | Installation: Replace the retainers (2) | |
5 | Installation in reverse order |