1 | Connection |
S27.19-4548-02
3 | Electrical connector |
4 | Guides |
5 | Bolts |
6 | Bolts |
7 | Bolts |
8 | Bolts |
9 | Screw |
S27.19-4549-06
1 | Connection |
10 | Electrical connector |
S27.19-4550-02
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Notes on automatic transmission | |||
| Remove/install | ||
1 | Remove automatic transmission oil pan | ||
2 | Release and disconnect electrical connector from connection (1) | ||
3 | Remove safety clip from connection (1) | ||
4 | Release, disconnect electrical connector (3), and detach electrical wiring harness from guides (4) | ||
5 | Remove bolt/bolts (5) | Screw, electronic controller unit to transmission | |
6 | Remove bolts (6) | Screw, electronic controller unit to transmission | |
7 | Remove bolts(7) | Screw, electronic controller unit to transmission | |
8 | Remove screws/bolts (8) | Aid of helper required. | |
Screw, electronic controller unit to transmission | |||
9 | Remove bolt (9) | Aid of helper required. | |
Screw, electronic controller unit to transmission | |||
10 | Push connection (1) downwards out of automatic transmission and remove electronic controller unit | | |
Aid of helper required. | |||
Installation: Check electronic controller unit is correctly seated. | |||
11 | Release, disconnect electrical connector (10), and remove connection (1) from electronic controller unit | Installation: Replace connection (1). | |
12 | Install in the reverse order | ||
13 | Read out and erase fault memory | ||
|