AR27.19-S-0100A | Removing and installing the cable harness in the electro-hydraulic control module | 10.1.96 |
ENGINE 111, 601.970, 611.980 in MODEL 638 with CODE (G40) Automatic transmission
S27.19-2012-09
B91 Inductive transmitter
B91.1 Plug-in connection inductive transmitter
B92 Inductive transmitter
B92.1 Plug-in connection inductive transmitter
B93 Oil temperature sensor
X106 Plug-in connection
Y71 Pressure regulator 1
Y71.1 Plug-in connection pressure regulator 1
Y72 Pressure regulator 2
Y72.1 Plug-in connection pressure regulator 2
Y73 Pressure regulator 3
Y73.1 Plug-in connection pressure regulator 3
Y74 Pressure regulator 4
Y74.1 Plug-in connection pressure regulator 4
Y75 Magnetic valve 1
Y75.1 Plug-in connection magnetic valve 1
Y76 Magnetic valve 2
Y76.1 Plug-in connection magnetic valve 2
| Removing, installing | ||
| Ensure total cleanliness! Use fluff-free cloths! | Risk of damage due to dirt in the transmission | |
1 | Remove the electrohydraulic control distributor and leave it on a clean surface | Transmission installed | |
Transmission removed | |||
2 | Disconnect the plug-in connection of the inductive sensor (B91.1) and remove the inductive sensor (B91) | Yellow coloured wires | |
3 | Disconnect the plug-in connection of the inductive sensor (B92.1) and remove the inductive sensor (B92) | Brown coloured wires | |
4 | Disconnect the plug-in connection of pressure regulator 3 (Y73.1) in pressure regulator 3 (Y73) and remove the wires from the clamp (arrow) | Blue, lilac coloured wires | |
5 | Disconnect the plug-in connection of electromagnetic valve 2 (Y76.1) in magnetic electrovalve 2 (Y76) | Green, lilac coloured wires | |
6 | Disconnect plug-in connection of pressure regulator 1 (Y71.1) in pressure regulator 1 (Y71) | Yellow, lilac coloured wires | |
7 | Withdraw the oil temperature sensor (B93) from its seating hole in the electrohydraulic control distributor | ||
8 | Disconnect plug-in connection of pressure regulator 2 (Y72.1) in pressure regulator 2 (Y72) | Red, lilac coloured wires | |
9 | Disconnect plug-in connection of pressure regulator 4 (Y74.1) in pressure regulator 4 (Y74) | White, lilac coloured wires | |
10 | Disconnect plug-in connection of magnetic electrovalve 1 (Y75.1) in magnetic electrovalve 1 (Y75.1) | Grey, lilac coloured wires | |
11 | Place the electrohydraulic control distributor face downwards and remove the cable harness, at the same time disconnect the electric connection (arrow) of the inductive sensor (B92) | ||
12 | Install in reverse order |