Removing and installing 1st gear switch

ประเภท ar · หัวข้อ 27.19 · เวอร์ชัน 0102 · 1999-01-28

ใช้กับ: TRANSMISSION 722.330 in MODEL 901.3##, 902.3##, 903.3##, 904.3## ## up to 689836 with ENGINE 601.943 TRANSMISSION 722.375 in MODEL 901.4##, 902.4##, 903.4##, 904.4##, 901.000 ## up to 689836 with ENGINE 602.980 TRANSMISSION 722.376 in MODEL 901.06#, 902.0##, 903.0##, 904.0## ## up to 689836 with ENGINE 111.979

ไม่มีใน “th” แสดงเป็น อังกฤษ

AR27.19-D-1100A

15.2.96

TRANSMISSION 722.330 in MODEL 901.3##, 902.3##, 903.3##, 904.3## ## up to 689836 with ENGINE 601.943

TRANSMISSION 722.375 in MODEL 901.4##, 902.4##, 903.4##, 904.4##, 901.000 ## up to 689836 with ENGINE 602.980

TRANSMISSION 722.376 in MODEL 901.06#, 902.0##, 903.0##, 904.0## ## up to 689836 with ENGINE 111.979

D27.19-0007-01

D27.19-0006-01

D27.19-0005-01

 	Removal, installation
	1st gear switch omitted.	Mod. des. 901.0/4 902.0/4 903.0/4 904.0/4 as of VIN 689837	BT27.19-N-0002-01A
1	Pull off boot (1) on selector lever.
2	Disconnect connector of 1st gear switch (3).
3	Unscrew hexagon bolts (2) and remove 1st gear switch.	 Installation: Adjust 1st gear switch so that the gear display for 1st gear lights up in the display in selector position "1". Repeat adjustment, if necessary.

เอกสารที่อ้างถึง

bt2719n000201a