W26.60-1146-06
1 Lock rod
2 Spring
3 Retaining ring
4 Spacer ring
5 Shim
6 Catch bolt
7 Cap
8 Catch bolt
9 Spring
10 Screw plug
11 Bleed nozzle
| Remove/install | ||
1 | Remove cap (7) | The cap (7) is destroyed during removal. | |
Installation: Coat new end cover (7) with locking agent and install in the transmission housing using a suitable drift. | |||
2 | Move the gearshift into neutral with the drive plate | Driver (transmission emergency shifting) | |
3 | Unclip vent nozzle (11) on the screw plug (10) | ||
4 | Remove screw plug (10) | The screw plug (10) is spring-loaded. | |
Installation: It is essential to tighten the screw plug (10) to the specified torque otherwise the transmission housing may be damaged. | |||
| |||
5 | Remove spring (9) from catch bolt (8) | ||
6 | Remove catch bolt (8) and in the process simultaneously seal the opening of the end cap (7) | The lock rod (1) is spring-loaded and otherwise jumps out of the transmission. | |
7 | Pull out lock rod (1) with spring (2) and catch bolt (6). | Installation: Before installing the lock rod (1): | |
Adjust lock rod (1). | |||
Depth gage | |||
8 | Install in the reverse order |
Test and adjustment values for gearshift system
Housing
Number | Designation | Trans-mission 715.570/ | |
BA26.40-N-1007-01D | Range group shift lock to transmission housing | Nm | 50 |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1008-02A | Quick-acting adhesive, Loctite 270 | A 002 989 93 71 |