AR26.60-W-0012D | Sensor unit removal and installation | 3.11.10 |
TRANSMISSION 712.611 /62, 715.050 in MODEL 970, 972, 976 with CODE (GE1) Automatic gear control (AGS)
TRANSMISSION 712.63, 715.060 in MODEL 970, 972, 974, 976 with CODE (GE1) Automatic gear control (AGS)
TRANSMISSION 712.63 in MODEL 950.5, 952.5, 954.5 with CODE (GE1) Automatic gear control (AGS)
TRANSMISSION 715.060 in MODEL 950.5 /6, 952.5, 954.5 with CODE (GE1) Automatic gear control (AGS)
W26.60-1153-11
Shown on model 972
1 Cover
2 Bolt
3 Plug connector
A93 Automatic gear control (AGS) shift control unit
| Remove/Install | ||
1 | Switch off ignition | ||
2 | Remove cover (1) | | |
3 | Loosen screw (2) | | |
4 | Withdraw automatic gear control (AGS) shift control unit (A93) to front | ||
5 | Release connector (3) and detach from automatic gear control (AGS) shift control unit (A93) | ||
6 | Install in the reverse order | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns when working in engine during starting procedure | Secure vehicle to prevent it from moving. | |
7 | Perform function check | Check all automatic gear control (AGS) shift control unit (A93) functions. |
Automatic gear control (AGS)
Number | Designation | Transmission | ||
BA26.60-N-1007-02A | Bolt for sensor unit to bracket | Nm | 10 | |
Mounting wedge
110 589 03 59 00