Remove/install shift cables

AR26.60-T-6626AA

1.6.01

TRANSMISSION 714.140 /120 in MODEL NMB613, 671 with CODE (G63) "Control cable" gearshift

T26.10-0014-01

1 Shift cables

2 Bracket

3 Relay lever

4 Relay lever

5 Bracket

6 Shift device

7 Supporting bracket

T26.60-0037-01

 	Remove/install
1	Put transmission and shift mechanism in neutral
2	Remove passenger seat above transmission maintenance flap.	Model 613
		Except model 671 FACELIFT 2000
		Model 671 FACELIFT 2000	AR91.21-T-4460D
3	Remove transmission maintenance flap.
4	Detach shift cables (1) from bracket (2) and from reversing levers (3, 4)
Danger!	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between the columns of the lifting platform and position the four support plates below the hoist support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
5	Raise vehicle.	Model 613	AR00.60-T-1000B
		Model 671	AR00.60-T-1000AA
6	Remove engine compartment paneling underneath transmission	Model 671.015/020/021/030/042/332	AR61.20-T-1105AA
		Model 613.358/388	AR61.20-T-1105B
		Model 613.364/365	AR61.20-T-1105C
		Model 613.367/368	AR61.20-T-1105CA
7	Detach shift cables (1) from shift device (6) and supporting bracket (7).	 Install new self-locking nuts.
	Notes on self-locking nuts and bolts	All models	AH00.00-N-0001-01A
8	Disconnect cable ties for fastening shift cables (1) to frame
9	Detach bracket for fastening shift cables (1) to frame
10	Pull out shift cables (1) forwards
11	Install in the reverse order
	Adjust
12	Loosen locknuts on adjustment threaded rods	 Transmission and shift mechanism are in neutral
13	Set zero clearance for shift cables (1) by turning the adjustment threaded rods, tighten locknuts
14	Shift through all gears, adjust settings if necessary