1 | Shift cable, outer |
2 | Shift cable, center |
3 | Ball socket of outer shift cable |
4 | Ball socket of center shift cable |
5 | Gearshift lever with bearing bracket |
6 | Locking plate |
7 | Screw |
8 | Electrical connector |
S16/2 | Backup lamp switch |
S26.60-4501-06
Topical note | Notes on self-locking nuts and bolts | ||
| Remove | ||
1 | Remove center console | ||
2 | Remove paneling on center console | ||
3 | Disconnect electrical connector (8) | ||
4 | Using a suitable tool, remove ball socket of outer shift cable (3) from ball head | ||
5 | Remove outer shift cable (1) from gearshift lever with bearing bracket (5) using a suitable tool | ||
6 | Remove gearshift lever with bearing bracket (5) from the crossmember below the dashboard | To do this, unscrew bolts (7) and remove gearshift lever with bearing bracket (5) downwards. | |
7 | Using a suitable tool, remove ball socket of center shift cable (4) from ball head | ||
8 | Remove center shift cable (2) from gearshift lever with bearing bracket (5) using a suitable tool | ||
9 | Remove gearshift lever with bearing bracket (5) | ||
10 | Remove backup lamp switch (S16/2) | Only when replacing the gearshift lever with bearing bracket (5) | |
| Install | ||
11 | Install backup lamp switch (S16/2) | Only when replacing the gearshift lever with bearing bracket (5). | |
12 | Insert setting tool into length adjuster of the shift cable | ||
| Adjustment tool for shift cable length adjuster | ||
13 | Route shift cable center (2) into gearshift lever with bearing bracket (5) | Replace locking plate (6). | |
14 | Attach center shift cable ball socket (4) to ball head | Grease the ball head and ball socket for the shift cable center (4). | |
Long-life grease | |||
15 | Mount gearshift lever with bearing bracket (5) to the crossmember below the dashboard | Apply thread locking compound to screws (7) and turn in screws (7). | |
Screw, manual gearshift system to instrument panel crossmember | |||
Quick-acting adhesive, Loctite 270 | |||
16 | Route shift cable outside (1) into gearshift lever with bearing bracket (5) | Replace locking plate (6). | |
17 | Attach outer shift cable ball socket (3) to ball head | Grease ball head and ball socket of outer shift cable (3). | |
Long-life grease | |||
18 | Connect electrical connector (8) | ||
19 | Adjust shift cables for manual transmission | ||
20 | Install paneling on center console | ||
21 | Install center console | ||
| Check | ||
22 | Perform function test of shifting |