S26.60-4550-09
1 | Bolts | 3 | Wiring harness | B | Shift cable | ||
2 | Cable tie | A | Shift cable |
S26.60-4551-08
4 | Gearshift lever with bearing bracket | A | Shift cable | |
5 | Mounting clip | B | Shift cable |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove | ||
1 | Remove center console | ||
2 | Remove air duct | ||
3 | Cut the cable ties (2) and place wiring harness (3) to one side | ||
4 | Unhook shift cables (A, B) on gearshift lever with bearing bracket (4) at front | ||
5 | Remove screw/bolt (1) | ||
6 | Use suitable tool to pry off the shift cable (A) from the gearshift lever with bearing bracket (4) | ||
7 | Use suitable tool to remove retaining clip (5) | ||
8 | Disconnect shift cable (B) from gearshift lever with bearing bracket (4) | ||
9 | Remove gearshift lever with bearing bracket (4) | ||
10 | Remove boot from gearshift lever | When replacing gearshift lever with bearing bracket (4). | |
| Install | ||
11 | Position gearshift lever with bearing bracket (4) | ||
12 | Install shift cable (A) onto gearshift lever with bearing bracket (4) | ||
13 | Install shift cable (B) onto gearshift lever with bearing bracket (4) | ||
14 | Tighten screws/bolts (1) | Screw, bearing bracket to transmission tunnel | |
15 | Install retaining clip (5) in first notch position | | |
Replace retaining clip (5). | |||
16 | Adjust shift cables (A, B) | ||
17 | Position wiring harness (3) and fix in place using cable ties (2) | ||
18 | Install air duct | ||
19 | Install center console |