1 | Jack |
2 | Needle roller bearing |
3 | Reverse gearwheel |
4 | Pressure plate |
T26.50-0008-01
| Disassemble | ||
1 | Remove rear transmission housing | ||
2 | Pull bushing (1) off needle bearing (2) | ||
3 | Pull pressure disk (4) off reverse gear gearwheel (3) | ||
4 | Pull needle bearing (2) off reverse gear gearwheel (3) | ||
| Clean | ||
5 | Clean all parts | ||
| Check | ||
6 | Check all components for wear and condition | If there are problems | |
| |||
Replace affected component. | |||
| Assemble | ||
7 | Push bushing (1) into needle bearing (2) | ||
8 | Push needle bearing (2) into reverse gear gearwheel (3) | ||
9 | Push pressure disk (4) onto reverse gear gearwheel (3) | ||
10 | Install rear transmission housing |