Remove/install reverse idler shaft with reverse gear

AR26.50-D-2002-01TSR

Remove/install reverse idler shaft with reverse gear

 Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A



Gear oils (Sheet 235.10)

BB00.40-P-0235-10A

Transmission

711.6 in model 907

 Gear set, shafts

Number

Designation

Transmission 711.680

Transmission 711.685

BA26.50-N-1002-01D

Mounting bolt, reverse idler shaft to transmission housing

M8

Nm

20

20

1

Remove screw/bolt (1).

2

Remove bearing shell (6).

3

Remove thrust plate (4), reverse idler gear (3) and cylindrical roller bearing (2).

4

Pull out reverse idler shaft (5).

5

Check all component parts for damage and wear.

If one or more component parts are damaged or worn:



Replace corresponding components.

6

Insert reverse idler shaft (5).

7

Insert bolt (1) and align threaded hole of reverse idler shaft (5) with bolt (1).

8

Remove and dispose of screw (1).

9

Oil reverse idler shaft (5), cylindrical roller bearing (2) and thrust plate (4) lightly with automatic transmission fluid.

10

Slide cylindrical roller bearing (2), reverse idler gear (3) and thrust plate (4) onto reverse idler axle (5).

 The inscription on the reverse idler gear (3) must point toward the drive side.

11

Install bearing shell (6).

 Inscription on bearing shell (6) must point toward drive side.

12

Screw in new screw (1)   .