AR26.45-W-0068A | Remove/install bearing flange on output | 16.2.07 |
TRANSMISSION 715.500 /507 /510 /513 /517 /520 /527 /540 with CODE (N56) Transmission independent power take-off (NMV) i = 1.48
TRANSMISSION 715.500 /507 /510 /513 /517 /520 /527 /540 with CODE (N57) Transmission independent power take-off (NMV) i = 1.09
W26.45-1027-05
1 Transmission housing
2 Shim
3 O-ring
4 Bearing flange
5 Safety catch
6 Bolt
7 Output flange
8 Thrust washer
9 Stretch bolt
10 Bolt
11 Bolt
12 Radial shaft seal
| Removal | ||
1 | Remove output flange (7) | | |
2 | Remove safety catch (5) | ||
3 | Remove bearing flange (4) | Unscrew adjusting nut approx. one revolution from the bearing flange (4) and attach puller to the adjusting nut. | |
| |||
4 | Remove O-ring (3) and spacer washer (2) | ||
| Install | ||
5 | Slide spacer washer (2) onto the output shaft and insert new O-ring (3) into the transmission housing (1) | ||
6 | Install bearing flange (4) | | |
7 | Install safety catch (5) | | |
8 | Install rotary shaft seal (12) | | |
9 | Install new output flange (7) with a new stretch bolt (9) | | |
|
Power take-off
Number | Designation | Transmission | ||
BA26.45-N-1009-01D | Stretch bolt, output flange to output shaft | Nm | 76 | |
BA26.45-N-1010-01D | Output bearing flange to manual transmission | Nm | 40 | |
BA26.45-N-1018-01D | Locking bolt of positioning nut to PTO | Nm | 23 | |
343 589 06 15 00
Retainer wrench
Drift
Puller
717 589 00 31 00
000 589 89 33 00