Test values for PTO
Number | Designation | Transmission | ||
BE26.45-N-1002-01F | Axial play of drive shaft bearing in housing | Power take-off 1 | mm | 0.06...0.12 |
Power take-off 2 | mm | 0.4...0.8 | ||
Strip clamp
000 589 59 63 00
W26.45-1174-01
1 Fit centering ring (33) with clamping strips with zero clearance.
The input shaft (25) must rotate freely.
W26.45-1173-04
2 Measure from centering ring (33) to housing (36), dimension (B).
W26.45-1171-04
3 Insert shim (34) which has been removed and fit a new gasket (67).
4 Measure from seal (67) to shim (34),
dimension (A).
5 Calculate dimension C: Dimension A - dimension
B = dimension C.
A new seal is compressed approx. 0.05 mm when installed. Dimension C must therefore be 0.05 mm larger than the required axial play for power take-off 1.
6 Compensate for any deviation using suitable shim (34).