1 | Hydraulic pump |
2 | Nut |
3 | Seal |
4 | Adapter |
W26.45-0064-11
Danger ! | Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid. | Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses. | |
| Remove/install | ||
1 | Detach hydraulic lines from hydraulic pump (1) | Collect hydraulic fluid which flows out in a suitable vessel. | |
2 | Detach hydraulic pump (1) and remove adapter (4) | Collect oil which runs out in a suitable container. | |
Installation: Clean sealing surfaces and replace seals (3). | |||
Nut, hydraulic pump to power take-off | |||
3 | Install in the reverse order | ||
4 | Check hydraulic fluid level in oil reservoir, correct if necessary | Note operation and maintenance procedures from each manufacturer. | |
5 | Check transmission oil level, adjust to correct level if necessary | ||
| Transmission 715.320/350/370/380/500/507/510/513/515/525/540/561 Transmission 715.520 without code G02 (Torque converter clutch (WSK)) Transmission 715.570 except in model 949 | ||
| Transmission 715.520 with code G02 (Torque converter clutch (WSK)) | ||
| Transmission 715.570 in model 949 |