Install power take-off bearing cap

ประเภท ar · หัวข้อ 26.45 · เวอร์ชัน 0100 · 2009-03-18

ใช้กับ: TRANSMISSION 711.651 in MODEL 906 with CODE (N07) Power take-off countershaft (2b) with flange TRANSMISSION 711.660 in MODEL 906 with CODE (N07) Power take-off countershaft (2b) with flange TRANSMISSION 711.680 in MODEL 906 with CODE (N07) Power take-off countershaft (2b) with flange TRANSMISSION 711.685 in MODEL 906 with CODE (N07) Power take-off countershaft (2b) with flange

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 2 Chassis › 26 Manual transmission › 26.45 Power take-off, PTO transmission — ซีรีส์ 906

EinPAS 17 Drivetrain/axle › 17.45 Power take-off › 17.45.35 Housing/cap/mounting — ซีรีส์ 906

ใช้กับเครื่องยนต์/เกียร์ด้วย: 711 651, 711 660, 711 680, 711 685

AR26.45-D-0015-03A

Install power take-off bearing cap

 PTO

Number	Designation		Transmissions 711.651/660 with code N05, N07	Transmissions 711.680/685 with code N05, N07


BA26.45-N-1002-01A	Bearing cap or hydraulic pump on power takeoff	Nm	46	46

Drift

711 589 11 15 00

D26.45-1021-01

1 Insert shim (6) with determined thickness in the bearing cap (4).

2 Press in new bearing race all the way using drift (7) .

3 Fit bearing cap (4) with new seal (5).

4 Attach washers (3) and tighten nuts (2) and bolt (1), .

D26.45-1010-03